# ------------------------------------------------------------------------------------------------- # Copyright (c) 2010-2020 zsh-syntax-highlighting contributors # All rights reserved. # # Redistribution and use in source and binary forms, with or without modification, are permitted # provided that the following conditions are met: # # * Redistributions of source code must retain the above copyright notice, this list of conditions # and the following disclaimer. # * Redistributions in binary form must reproduce the above copyright notice, this list of # conditions and the following disclaimer in the documentation and/or other materials provided # with the distribution. # * Neither the name of the zsh-syntax-highlighting contributors nor the names of its contributors # may be used to endorse or promote products derived from this software without specific prior # written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR # IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND # FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR # CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER # IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT # OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # ------------------------------------------------------------------------------------------------- # -*- mode: zsh; sh-indentation: 2; indent-tabs-mode: nil; sh-basic-offset: 2; -*- # vim: ft=zsh sw=2 ts=2 et # ------------------------------------------------------------------------------------------------- # First of all, ensure predictable parsing. typeset zsh_highlight__aliases="$(builtin alias -Lm '[^+]*')" # In zsh <= 5.2, aliases that begin with a plus sign ('alias -- +foo=42') # are emitted by `alias -L` without a '--' guard, so they don't round trip. # # Hence, we exclude them from unaliasing: builtin unalias -m '[^+]*' # Set $0 to the expected value, regardless of functionargzero. 0=${(%):-%N} if true; then # $0 is reliable typeset -g ZSH_HIGHLIGHT_VERSION=$(<"${0:A:h}"/.version) typeset -g ZSH_HIGHLIGHT_REVISION=$(<"${0:A:h}"/.revision-hash) if [[ $ZSH_HIGHLIGHT_REVISION == \$Format:* ]]; then # When running from a source tree without 'make install', $ZSH_HIGHLIGHT_REVISION # would be set to '$Format:%H$' literally. That's an invalid value, and obtaining # the valid value (via `git rev-parse HEAD`, as Makefile does) might be costly, so: ZSH_HIGHLIGHT_REVISION=HEAD fi fi # This function takes a single argument F and returns True iff F is an autoload stub. _zsh_highlight__function_is_autoload_stub_p() { if zmodload -e zsh/parameter; then #(( ${+functions[$1]} )) && [[ "$functions[$1]" == *"builtin autoload -X"* ]] else #[[ $(type -wa -- "$1") == *'function'* ]] && [[ "${${(@f)"$(which -- "$1")"}[2]}" == $'\t'$histchars[3]' undefined' ]] fi # Do nothing here: return the exit code of the if. } # Return True iff the argument denotes a function name. _zsh_highlight__is_function_p() { if zmodload -e zsh/parameter; then (( ${+functions[$1]} )) else [[ $(type -wa -- "$1") == *'function'* ]] fi } # This function takes a single argument F and returns True iff F denotes the # name of a callable function. A function is callable if it is fully defined # or if it is marked for autoloading and autoloading it at the first call to it # will succeed. In particular, if a function has been marked for autoloading # but is not available in $fpath, then this function will return False therefor. # # See users/21671 http://www.zsh.org/cgi-bin/mla/redirect?USERNUMBER=21671 _zsh_highlight__function_callable_p() { if _zsh_highlight__is_function_p "$1" && ! _zsh_highlight__function_is_autoload_stub_p "$1" then # Already fully loaded. return 0 # true else # "$1" is either an autoload stub, or not a function at all. # # Use a subshell to avoid affecting the calling shell. # # We expect 'autoload +X' to return non-zero if it fails to fully load # the function. ( autoload -U +X -- "$1" 2>/dev/null ) return $? fi } # ------------------------------------------------------------------------------------------------- # Core highlighting update system # ------------------------------------------------------------------------------------------------- # Use workaround for bug in ZSH? # zsh-users/zsh@48cadf4 http://www.zsh.org/mla/workers//2017/msg00034.html autoload -Uz is-at-least if is-at-least 5.4; then typeset -g zsh_highlight__pat_static_bug=false else typeset -g zsh_highlight__pat_static_bug=true fi # Array declaring active highlighters names. typeset -ga ZSH_HIGHLIGHT_HIGHLIGHTERS # Update ZLE buffer syntax highlighting. # # Invokes each highlighter that needs updating. # This function is supposed to be called whenever the ZLE state changes. _zsh_highlight() { # Store the previous command return code to restore it whatever happens. local ret=$? # Make it read-only. Can't combine this with the previous line when POSIX_BUILTINS may be set. typeset -r ret # $region_highlight should be predefined, either by zle or by the test suite's mock (non-special) array. (( ${+region_highlight} )) || { echo >&2 'zsh-syntax-highlighting: error: $region_highlight is not defined' echo >&2 'zsh-syntax-highlighting: (Check whether zsh-syntax-highlighting was installed according to the instructions.)' return $ret } # Probe the memo= feature, once. (( ${+zsh_highlight__memo_feature} )) || { region_highlight+=( " 0 0 fg=red, memo=zsh-syntax-highlighting" ) case ${region_highlight[-1]} in ("0 0 fg=red") # zsh 5.8 or earlier integer -gr zsh_highlight__memo_feature=0 ;; ("0 0 fg=red memo=zsh-syntax-highlighting") # zsh 5.9 or later integer -gr zsh_highlight__memo_feature=1 ;; (" 0 0 fg=red, memo=zsh-syntax-highlighting") ;& (*) # We can get here in two ways: # # 1. When not running as a widget. In that case, $region_highlight is # not a special variable (= one with custom getter/setter functions # written in C) but an ordinary one, so the third case pattern matches # and we fall through to this block. (The test suite uses this codepath.) # # 2. When running under a future version of zsh that will have changed # the serialization of $region_highlight elements from their underlying # C structs, so that none of the previous case patterns will match. # # In either case, fall back to a version check. # # The memo= feature was added to zsh in commit zsh-5.8-172-gdd6e702ee. # The version number at the time was 5.8.0.2-dev (see Config/version.mk). # Therefore, on 5.8.0.3 and newer the memo= feature is available. # # On zsh version 5.8.0.2 between the aforementioned commit and the # first Config/version.mk bump after it (which, at the time of writing, # is yet to come), this condition will false negative. if is-at-least 5.8.0.3 $ZSH_VERSION.0.0; then integer -gr zsh_highlight__memo_feature=1 else integer -gr zsh_highlight__memo_feature=0 fi ;; esac region_highlight[-1]=() } # Reset region_highlight to build it from scratch if (( zsh_highlight__memo_feature )); then region_highlight=( "${(@)region_highlight:#*memo=zsh-syntax-highlighting*}" ) else # Legacy codepath. Not very interoperable with other plugins (issue #418). region_highlight=() fi # Remove all highlighting in isearch, so that only the underlining done by zsh itself remains. # For details see FAQ entry 'Why does syntax highlighting not work while searching history?'. # This disables highlighting during isearch (for reasons explained in README.md) unless zsh is new enough # and doesn't have the pattern matching bug if [[ $WIDGET == zle-isearch-update ]] && { $zsh_highlight__pat_static_bug || ! (( $+ISEARCHMATCH_ACTIVE )) }; then return $ret fi # Before we 'emulate -L', save the user's options local -A zsyh_user_options if zmodload -e zsh/parameter; then zsyh_user_options=("${(kv)options[@]}") else local canonical_options onoff option raw_options raw_options=(${(f)"$(emulate -R zsh; set -o)"}) canonical_options=(${${${(M)raw_options:#*off}%% *}#no} ${${(M)raw_options:#*on}%% *}) for option in "${canonical_options[@]}"; do [[ -o $option ]] case $? in (0) zsyh_user_options+=($option on);; (1) zsyh_user_options+=($option off);; (*) # Can't happen, surely? echo "zsh-syntax-highlighting: warning: '[[ -o $option ]]' returned $?" ;; esac done fi typeset -r zsyh_user_options emulate -L zsh setopt localoptions warncreateglobal nobashrematch local REPLY # don't leak $REPLY into global scope # Do not highlight if there are more than 300 chars in the buffer. It's most # likely a pasted command or a huge list of files in that case.. [[ -n ${ZSH_HIGHLIGHT_MAXLENGTH:-} ]] && [[ $#BUFFER -gt $ZSH_HIGHLIGHT_MAXLENGTH ]] && return $ret # Do not highlight if there are pending inputs (copy/paste). [[ $PENDING -gt 0 ]] && return $ret { local cache_place local -a region_highlight_copy # Select which highlighters in ZSH_HIGHLIGHT_HIGHLIGHTERS need to be invoked. local highlighter; for highlighter in $ZSH_HIGHLIGHT_HIGHLIGHTERS; do # eval cache place for current highlighter and prepare it cache_place="_zsh_highlight__highlighter_${highlighter}_cache" typeset -ga ${cache_place} # If highlighter needs to be invoked if ! type "_zsh_highlight_highlighter_${highlighter}_predicate" >&/dev/null; then echo "zsh-syntax-highlighting: warning: disabling the ${(qq)highlighter} highlighter as it has not been loaded" >&2 # TODO: use ${(b)} rather than ${(q)} if supported ZSH_HIGHLIGHT_HIGHLIGHTERS=( ${ZSH_HIGHLIGHT_HIGHLIGHTERS:#${highlighter}} ) elif "_zsh_highlight_highlighter_${highlighter}_predicate"; then # save a copy, and cleanup region_highlight region_highlight_copy=("${region_highlight[@]}") region_highlight=() # Execute highlighter and save result { "_zsh_highlight_highlighter_${highlighter}_paint" } always { : ${(AP)cache_place::="${region_highlight[@]}"} } # Restore saved region_highlight region_highlight=("${region_highlight_copy[@]}") fi # Use value form cache if any cached region_highlight+=("${(@P)cache_place}") done # Re-apply zle_highlight settings # region () { (( REGION_ACTIVE )) || return integer min max if (( MARK > CURSOR )) ; then min=$CURSOR max=$MARK else min=$MARK max=$CURSOR fi if (( REGION_ACTIVE == 1 )); then [[ $KEYMAP = vicmd ]] && (( max++ )) elif (( REGION_ACTIVE == 2 )); then local needle=$'\n' # CURSOR and MARK are 0 indexed between letters like region_highlight # Do not include the newline in the highlight (( min = ${BUFFER[(Ib:min:)$needle]} )) (( max = ${BUFFER[(ib:max:)$needle]} - 1 )) fi _zsh_highlight_apply_zle_highlight region standout "$min" "$max" } # yank / paste (zsh-5.1.1 and newer) (( $+YANK_ACTIVE )) && (( YANK_ACTIVE )) && _zsh_highlight_apply_zle_highlight paste standout "$YANK_START" "$YANK_END" # isearch (( $+ISEARCHMATCH_ACTIVE )) && (( ISEARCHMATCH_ACTIVE )) && _zsh_highlight_apply_zle_highlight isearch underline "$ISEARCHMATCH_START" "$ISEARCHMATCH_END" # suffix (( $+SUFFIX_ACTIVE )) && (( SUFFIX_ACTIVE )) && _zsh_highlight_apply_zle_highlight suffix bold "$SUFFIX_START" "$SUFFIX_END" return $ret } always { typeset -g _ZSH_HIGHLIGHT_PRIOR_BUFFER="$BUFFER" typeset -gi _ZSH_HIGHLIGHT_PRIOR_CURSOR=$CURSOR } } # Apply highlighting based on entries in the zle_highlight array. # This function takes four arguments: # 1. The exact entry (no patterns) in the zle_highlight array: # region, paste, isearch, or suffix # 2. The default highlighting that should be applied if the entry is unset # 3. and 4. Two integer values describing the beginning and end of the # range. The order does not matter. _zsh_highlight_apply_zle_highlight() { local entry="$1" default="$2" integer first="$3" second="$4" # read the relevant entry from zle_highlight # # ### In zsh≥5.0.8 we'd use ${(b)entry}, but we support older zsh's, so we don't # ### add (b). The only effect is on the failure mode for callers that violate # ### the precondition. local region="${zle_highlight[(r)${entry}:*]-}" if [[ -z "$region" ]]; then # entry not specified at all, use default value region=$default else # strip prefix region="${region#${entry}:}" # no highlighting when set to the empty string or to 'none' if [[ -z "$region" ]] || [[ "$region" == none ]]; then return fi fi integer start end if (( first < second )); then start=$first end=$second else start=$second end=$first fi region_highlight+=("$start $end $region, memo=zsh-syntax-highlighting") } # ------------------------------------------------------------------------------------------------- # API/utility functions for highlighters # ------------------------------------------------------------------------------------------------- # Array used by highlighters to declare user overridable styles. typeset -gA ZSH_HIGHLIGHT_STYLES # Whether the command line buffer has been modified or not. # # Returns 0 if the buffer has changed since _zsh_highlight was last called. _zsh_highlight_buffer_modified() { [[ "${_ZSH_HIGHLIGHT_PRIOR_BUFFER:-}" != "$BUFFER" ]] } # Whether the cursor has moved or not. # # Returns 0 if the cursor has moved since _zsh_highlight was last called. _zsh_highlight_cursor_moved() { [[ -n $CURSOR ]] && [[ -n ${_ZSH_HIGHLIGHT_PRIOR_CURSOR-} ]] && (($_ZSH_HIGHLIGHT_PRIOR_CURSOR != $CURSOR)) } # Add a highlight defined by ZSH_HIGHLIGHT_STYLES. # # Should be used by all highlighters aside from 'pattern' (cf. ZSH_HIGHLIGHT_PATTERN). # Overwritten in tests/test-highlighting.zsh when testing. _zsh_highlight_add_highlight() { local -i start end local highlight start=$1 end=$2 shift 2 for highlight; do if (( $+ZSH_HIGHLIGHT_STYLES[$highlight] )); then region_highlight+=("$start $end $ZSH_HIGHLIGHT_STYLES[$highlight], memo=zsh-syntax-highlighting") break fi done } # ------------------------------------------------------------------------------------------------- # Setup functions # ------------------------------------------------------------------------------------------------- # Helper for _zsh_highlight_bind_widgets # $1 is name of widget to call _zsh_highlight_call_widget() { builtin zle "$@" && _zsh_highlight } # Decide whether to use the zle-line-pre-redraw codepath (colloquially known as # "feature/redrawhook", after the topic branch's name) or the legacy "bind all # widgets" codepath. # # We use the new codepath under two conditions: # # 1. If it's available, which we check by testing for add-zle-hook-widget's availability. # # 2. If zsh has the memo= feature, which is required for interoperability reasons. # See issues #579 and #735, and the issues referenced from them. # # We check this with a plain version number check, since a functional check, # as done by _zsh_highlight, can only be done from inside a widget # function — a catch-22. # # See _zsh_highlight for the magic version number. (The use of 5.8.0.2 # rather than 5.8.0.3 as in the _zsh_highlight is deliberate.) if is-at-least 5.8.0.2 $ZSH_VERSION.0.0 && _zsh_highlight__function_callable_p add-zle-hook-widget then autoload -U add-zle-hook-widget _zsh_highlight__zle-line-finish() { # Reset $WIDGET since the 'main' highlighter depends on it. # # Since $WIDGET is declared by zle as read-only in this function's scope, # a nested function is required in order to shadow its built-in value; # see "User-defined widgets" in zshall. () { local -h -r WIDGET=zle-line-finish _zsh_highlight } } _zsh_highlight__zle-line-pre-redraw() { # Set $? to 0 for _zsh_highlight. Without this, subsequent # zle-line-pre-redraw hooks won't run, since add-zle-hook-widget happens to # call us with $? == 1 in the common case. true && _zsh_highlight "$@" } _zsh_highlight_bind_widgets(){} if [[ -o zle ]]; then add-zle-hook-widget zle-line-pre-redraw _zsh_highlight__zle-line-pre-redraw add-zle-hook-widget zle-line-finish _zsh_highlight__zle-line-finish fi else # Rebind all ZLE widgets to make them invoke _zsh_highlights. _zsh_highlight_bind_widgets() { setopt localoptions noksharrays typeset -F SECONDS local prefix=orig-s$SECONDS-r$RANDOM # unique each time, in case we're sourced more than once # Load ZSH module zsh/zleparameter, needed to override user defined widgets. zmodload zsh/zleparameter 2>/dev/null || { print -r -- >&2 'zsh-syntax-highlighting: failed loading zsh/zleparameter.' return 1 } # Override ZLE widgets to make them invoke _zsh_highlight. local -U widgets_to_bind widgets_to_bind=(${${(k)widgets}:#(.*|run-help|which-command|beep|set-local-history|yank|yank-pop)}) # Always wrap special zle-line-finish widget. This is needed to decide if the # current line ends and special highlighting logic needs to be applied. # E.g. remove cursor imprint, don't highlight partial paths, ... widgets_to_bind+=(zle-line-finish) # Always wrap special zle-isearch-update widget to be notified of updates in isearch. # This is needed because we need to disable highlighting in that case. widgets_to_bind+=(zle-isearch-update) local cur_widget for cur_widget in $widgets_to_bind; do case ${widgets[$cur_widget]:-""} in # Already rebound event: do nothing. user:_zsh_highlight_widget_*);; # The "eval"'s are required to make $cur_widget a closure: the value of the parameter at function # definition time is used. # # We can't use ${0/_zsh_highlight_widget_} because these widgets are always invoked with # NO_function_argzero, regardless of the option's setting here. # User defined widget: override and rebind old one with prefix "orig-". user:*) zle -N $prefix-$cur_widget ${widgets[$cur_widget]#*:} eval "_zsh_highlight_widget_${(q)prefix}-${(q)cur_widget}() { _zsh_highlight_call_widget ${(q)prefix}-${(q)cur_widget} -- \"\$@\" }" zle -N $cur_widget _zsh_highlight_widget_$prefix-$cur_widget;; # Completion widget: override and rebind old one with prefix "orig-". completion:*) zle -C $prefix-$cur_widget ${${(s.:.)widgets[$cur_widget]}[2,3]} eval "_zsh_highlight_widget_${(q)prefix}-${(q)cur_widget}() { _zsh_highlight_call_widget ${(q)prefix}-${(q)cur_widget} -- \"\$@\" }" zle -N $cur_widget _zsh_highlight_widget_$prefix-$cur_widget;; # Builtin widget: override and make it call the builtin ".widget". builtin) eval "_zsh_highlight_widget_${(q)prefix}-${(q)cur_widget}() { _zsh_highlight_call_widget .${(q)cur_widget} -- \"\$@\" }" zle -N $cur_widget _zsh_highlight_widget_$prefix-$cur_widget;; # Incomplete or nonexistent widget: Bind to z-sy-h directly. *) if [[ $cur_widget == zle-* ]] && (( ! ${+widgets[$cur_widget]} )); then _zsh_highlight_widget_${cur_widget}() { :; _zsh_highlight } zle -N $cur_widget _zsh_highlight_widget_$cur_widget else # Default: unhandled case. print -r -- >&2 "zsh-syntax-highlighting: unhandled ZLE widget ${(qq)cur_widget}" print -r -- >&2 "zsh-syntax-highlighting: (This is sometimes caused by doing \`bindkey ${(q-)cur_widget}\` without creating the ${(qq)cur_widget} widget with \`zle -N\` or \`zle -C\`.)" fi esac done } fi # Load highlighters from directory. # # Arguments: # 1) Path to the highlighters directory. _zsh_highlight_load_highlighters() { setopt localoptions noksharrays bareglobqual # Check the directory exists. [[ -d "$1" ]] || { print -r -- >&2 "zsh-syntax-highlighting: highlighters directory ${(qq)1} not found." return 1 } # Load highlighters from highlighters directory and check they define required functions. local highlighter highlighter_dir for highlighter_dir ($1/*/(/)); do highlighter="${highlighter_dir:t}" [[ -f "$highlighter_dir${highlighter}-highlighter.zsh" ]] && . "$highlighter_dir${highlighter}-highlighter.zsh" if type "_zsh_highlight_highlighter_${highlighter}_paint" &> /dev/null && type "_zsh_highlight_highlighter_${highlighter}_predicate" &> /dev/null; then # New (0.5.0) function names elif type "_zsh_highlight_${highlighter}_highlighter" &> /dev/null && type "_zsh_highlight_${highlighter}_highlighter_predicate" &> /dev/null; then # Old (0.4.x) function names if false; then # TODO: only show this warning for plugin authors/maintainers, not for end users print -r -- >&2 "zsh-syntax-highlighting: warning: ${(qq)highlighter} highlighter uses deprecated entry point names; please ask its maintainer to update it: https://github.com/zsh-users/zsh-syntax-highlighting/issues/329" fi # Make it work. eval "_zsh_highlight_highlighter_${(q)highlighter}_paint() { _zsh_highlight_${(q)highlighter}_highlighter \"\$@\" }" eval "_zsh_highlight_highlighter_${(q)highlighter}_predicate() { _zsh_highlight_${(q)highlighter}_highlighter_predicate \"\$@\" }" else print -r -- >&2 "zsh-syntax-highlighting: ${(qq)highlighter} highlighter should define both required functions '_zsh_highlight_highlighter_${highlighter}_paint' and '_zsh_highlight_highlighter_${highlighter}_predicate' in ${(qq):-"$highlighter_dir${highlighter}-highlighter.zsh"}." fi done } # ------------------------------------------------------------------------------------------------- # Setup # ------------------------------------------------------------------------------------------------- # Try binding widgets. _zsh_highlight_bind_widgets || { print -r -- >&2 'zsh-syntax-highlighting: failed binding ZLE widgets, exiting.' return 1 } # Resolve highlighters directory location. _zsh_highlight_load_highlighters "${ZSH_HIGHLIGHT_HIGHLIGHTERS_DIR:-${${0:A}:h}/highlighters}" || { print -r -- >&2 'zsh-syntax-highlighting: failed loading highlighters, exiting.' return 1 } # Reset scratch variables when commandline is done. _zsh_highlight_preexec_hook() { typeset -g _ZSH_HIGHLIGHT_PRIOR_BUFFER= typeset -gi _ZSH_HIGHLIGHT_PRIOR_CURSOR= } autoload -Uz add-zsh-hook add-zsh-hook preexec _zsh_highlight_preexec_hook 2>/dev/null || { print -r -- >&2 'zsh-syntax-highlighting: failed loading add-zsh-hook.' } # Load zsh/parameter module if available zmodload zsh/parameter 2>/dev/null || true # Initialize the array of active highlighters if needed. [[ $#ZSH_HIGHLIGHT_HIGHLIGHTERS -eq 0 ]] && ZSH_HIGHLIGHT_HIGHLIGHTERS=(main) if (( $+X_ZSH_HIGHLIGHT_DIRS_BLACKLIST )); then print >&2 'zsh-syntax-highlighting: X_ZSH_HIGHLIGHT_DIRS_BLACKLIST is deprecated. Please use ZSH_HIGHLIGHT_DIRS_BLACKLIST.' ZSH_HIGHLIGHT_DIRS_BLACKLIST=($X_ZSH_HIGHLIGHT_DIRS_BLACKLIST) unset X_ZSH_HIGHLIGHT_DIRS_BLACKLIST fi # Restore the aliases we unned eval "$zsh_highlight__aliases" builtin unset zsh_highlight__aliases # Set $?. true